CLASSIFICATION
Techcon TS5400 Glue Valve
Techcon TS5400 Glue Valve
Taikang dispensing valve
TS5420 Adjustable Needle Valve is a pneumatic triggered single action valve that can be used for internal spring closure (single action) or connected to a needle valve to close air without the need for a spring (dual action).
The TS5440 micro glue point impact needle valve directly closes the fluid path on the sleeve inside the needle body using the needle, and can apply very precise glue points with a minimum of 0.0005 cm3.
The wetted parts of TS5440 needle valve include FDA standard 303 stainless steel.
● Product Description ●
Due to the smallest fluid "dead zone", the firing pin valve can precisely apply various sizes of adhesive dots and beads. External travel control allows operators to easily fine tune fluid flow. It is easy to maintain and almost eliminates or completely eliminates interruption time. The compact design and easy to install threaded holes make it convenient to integrate into automation applications.
TS5420 Adjustable Needle Valve is a pneumatic triggered single action valve that can be used for internal spring closure (single action) or connected to a needle valve to close air without the need for a spring (dual action).
The TS5440 micro glue point impact needle valve directly closes the fluid path on the sleeve inside the needle body using the needle, and can apply very precise glue points with a minimum of 0.0005 cm3.
The wetted parts of TS5440 needle valve include FDA standard 303 stainless steel.
Main features:
Accurate and consistent size of adhesive dots
TS5440 can apply a minimum of 0.5 microliters of adhesive per application
Achieving zero "dead weight" when using TS5440
By rotating the TS5420 needle collar, bent needles can be easily placed
TS5440 wetted parts include FDA standard 303 stainless steel
Due to the material export design, it is possible to accurately locate curved needles
Less design and maintenance work
Technical indicators:
| TS5420 | TS5420SS | TS5440 | |
| Specification (diameter x height): | 1.12” x 4.6” (28mm x 117mm) | 1.12” x 4.6” (28mm x 117mm) | 1.12” x 5” (28mm x 127mm) |
| Weight: | 0.3 pounds (136g) | 0.5 pounds (227g) | 0.5 pounds (227g) |
| Fluid inlet: | 1/8” NPT | 1/8” NPT | 1/8” NPT |
| Fluid outlet: | External thread Luer connector | External thread Luer connector | External thread Luer cone with locking cover |
| Installation: | 1/4-20UNC-2B | 1/4-20UNC-2B | 10-32UNF |
| Maximum fluid pressure: | 300psi (20.7bar) | 300psi (20.7bar) | 100psi (6.9bar) |
| Minimum work pressure: | 70psi (4.8bar) | 70psi (4.8bar) | 70psi (4.8bar) |
| Humidifier components: | 303 SS, Fluorinated Alumina, Teflon, EPR303 | SS, Teflon, EPR | SS, Teflon, EPR |
| Cycle rate: | More than 400 times per minute | More than 400 times per minute | More than 400 times per minute |
| Material viscosity range: | 1 – 100,000cps | 1 – 100,000cps | 1 – 100,000cps |
| guarantee: | 1 year | 1 year |
1 year |
